国产精品丝袜一区二区三区在线-粉嫩av一区二区三区高清-中文字幕熟妇人妻在线视频-久久伊人热热精品中文字幕

Hello! Shenzhen Win-drive Automation Equipment Co., Ltd. welcomes you!
0755-82113520、13823217507(WeChat)Site map|Legal Notice|Chinese
News
News
Current location: Home News Industry news NEUGART high load planetary gearbox product features
NEUGART high load planetary gearbox product features

Industry news|2022-04-16| admin


The NEUGART brand has a history of nearly 100 years. It initially produced precision gears. Until the 1960s, it began to produce planetary gearboxs. It has always adhered to this high-precision concept. The precision gearboxs produced have a wide range of applications in laser cutting, industrial automation and other industries. , Today I will introduce the characteristics of NEUGART planetary gearbox.


1) Reduce the speed while increasing the output torque. The torque output ratio is based on the motor output multiplied by the reduction ratio, but be careful not to exceed the rated torque of the gearbox.


2) The inertia of the load is reduced while decelerating, and the reduction in inertia is the square of the reduction rate. As you can see, GM has an inertia value. 2 kinds



Universal gearboxs include helical gear gearboxs, precision planetary gearboxs, servo special planetary gearboxs, right-angle planetary gearboxs, planetary gear gearboxs, helical gear gearboxs, powerful gearboxs, precision gearboxs, cycloid gearboxs, Worm gear gearbox, planetary friction mechanical continuously variable transmission, etc.


Generally divided into three types according to the number of stages: first-stage deceleration (generally less than 10), second-stage deceleration (generally greater than 10:1 but less than or equal to 64), third-stage deceleration (some brands do not have a third-stage, the maximum reduction ratio is 512).


By usage: military and civilian;


According to the operating environment: standard environment, low temperature environment, clean room environment, vacuum environment;


According to precision: standard precision and high precision.


NEUGART行星減速機.jpg

NEUGART planetary gearbox has the advantages of high cost performance, wide application, economical and practical, and long service life. In the application of servo control, it exerts good servo rigidity effect, precise positioning control, and has the characteristics of medium and low backlash, high efficiency, high input speed, high input torque, stable operation and low noise of the operating platform.


And the appearance and structural design are light and compact. Lubricating oil that can be replaced for life, and no matter where it is installed, it can avoid maintenance and operation, and the protection level is IP65, which can be used in harsh working environments. Robot industry, as well as electromechanical product automation industry.


This product has the advantages of compact structure, small return clearance, high precision, long life and large rated output torque. But the price is slightly more expensive. 4 application areas




Planetary gearboxs can be directly mounted on AC and DC servo motors and are widely used in medium-precision industrial fields. Such as: printing machine tools, flame cutting, laser cutting, CNC machine tools, tool machinery, food packaging, automation industry, aerospace, semiconductor equipment, medical equipment, robots, manipulators, communication equipment, pharmaceutical equipment, printing equipment, packaging machinery, textile machinery , CNC machine tools, CNC pipe bending machines, parking equipment, measuring equipment, machine tools, precision monitoring systems, vehicle industry, etc.




Torque=9550×motor power÷motor input speed×speed ratio×use coefficient


Remarks: Motor power unit [Kw]


Motor speed unit [rev/m]


Output torque unit [n m]


The motor utilization factor is the ratio of motor power to equipment power. In use, the coefficient should be selected according to the situation. But the bigger the better, because that would be wasteful. In general, if the impact of smooth operation is not large, the service factor is greater than or equal to 1.2. If there is no impact, as long as it is greater than or equal to 1, it runs smoothly. 6 Installation methods




Correct installation, use and maintenance of planetary gearbox is an important link to ensure the normal operation of mechanical equipment. Therefore, when installing the planetary gearbox, please carefully assemble and use it in strict accordance with the following installation and use related matters.


first step


Before installation, confirm whether the motor and gearbox are in good condition, and strictly check whether the dimensions of the parts connected between the motor and the gearbox match. The following are the dimensions and fit tolerances of the motor's positioning boss, input shaft, and reduction groove.


second step


Unscrew the screw on the dust hole on the outer side of the gearbox flange, adjust the PCS system clamping ring so that the side hole is aligned with the dust hole, and insert the hexagonal socket to tighten. After that, remove the motor shaft key.


third step


Connect the motor to the gearbox naturally. When connecting, make sure that the concentricity of the output shaft of the gearbox and the input shaft of the motor is the same, and the outer flanges of the two are parallel. Due to inconsistent concentricity, the motor shaft will break or the reduction gear will wear out.


In addition, during installation, it is forbidden to hit with a hammer to prevent excessive axial force or radial force from damaging the bearing or gear. Be sure to tighten the mounting bolts before tightening the pressure bolts. Before installation, wipe the anti-rust oil on the motor input shaft, positioning boss and gearbox connection with gasoline or zinc-sodium water. Its purpose is to ensure the tightness of the connection and the flexibility of operation, preventing unnecessary wear.


Before connecting the motor to the gearbox, the keyway of the motor shaft should be perpendicular to the fastening bolt. To ensure even force, first tighten the mounting bolts in any diagonal position, but not tight, then tighten the mounting bolts in the other two diagonal positions, and finally tighten the four mounting bolts one by one. Finally, tighten the bolts. All fastening bolts should be fastened and checked with a torque wrench according to the marked fastening torque data.


The correct installation between the gearbox and the mechanical equipment is similar to the correct installation between the gearbox and the drive motor. The key is to ensure that the concentricity of the output shaft of the gearbox is consistent with the concentricity of the driven part of the shaft.

Tel: 0755-82113520, 13823217507  
E-mail: sales@sz -windrive. com  
URL: m.seisborg.com com  
Address: room 406, MaoYuan building, No. 9, Songyuan Road, Guiyuan street, Luohu District, Shenzhen  

WeChat

Links
Shenzhen Win-Drive Automation Equipment Co., Ltd.  ALL RIGHT RESERVED 粵ICP備12016317號
国产精品国产三级国产专i 亚洲人成网亚洲欧洲无码 精品欧美一区二区三区久久久 | 国产精品熟女一区二区不卡 | 成人免费a级毛片无码片在线播放 | 亚洲欧洲无卡二区视頻 | 国产无遮挡又黄又爽又色 | 曰本女人与公拘交酡免费视频 | AA级一家天堂片免费观看 | 日日躁夜夜躁狠狠久久AV | 激情内射人妻1区2区3区 | 九九九热免费视频在线观看 | 久久九九有精品国产23 | 日本午夜精品理论片A级APP发布 | 久久久久久精品人妻免费网站不卡 | 人妻中文av无码字幕久久 | 少妇高清精品毛片在线视频 | 免费无码又爽又刺激一高潮 | 99无码熟妇丰满人妻啪啪 | 国产AV毛片1区2区3区 | 女同亚洲一区二区无线码 | 99精品视频免费热播在线观看 | 精品无码久久久久久久久 | 在线视频欧美一区 | 一区二区三区波多野结衣在线观看 | 久久精品国产一区二区电影 | 精品亚洲麻豆1区2区3区 | 国产不在在线一区二区三区 | 精品国精品国产自在久不卡 | 人人人人射人人人射人人摸 | 国产.日韩.欧美激情视频 | 日韩免费无码电影一区二区三区 | 国产无吗一区二区三区在线欢 | 99久久精品免费观看国产 | 国产一级毛片在线视频 | 国产精品国产三级国产专i 亚洲人成网亚洲欧洲无码 精品欧美一区二区三区久久久 | 成人看片黄a毛片三三电影网 | 国产精品自产拍在线观看 | ww亚洲ww亚在线观看 | 国产成人精品123区免费视频 | 中文字幕日产无线码一区 | 国产精品无码日韩欧久久精品 | 日韩人妻中文字幕毛片A√ 国产电影无码午夜在线播放 |